| 2022 | Evaluation of the color stability of 3D printed resin according to the oxygen inhibition effect and temperature difference in the post-polymerization process | JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
| 2022 | Influence of postwashing process on the elution of residual monomers, degree of conversion, and mechanical properties of a 3D printed crown and bridge materials | DENTAL MATERIALS |
| 2022 | Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study | JOURNAL OF DENTISTRY |
| 2022 | Effects of Post-Curing Light Intensity on the Mechanical Properties and Three-Dimensional Printing Accuracy of Interim Dental Material | MATERIALS |
| 2022 | Effect of air abrasion, acid etching, and aging on the shear bond strength with resin cement to 3Y-TZP zirconia | JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
| 2022 | Thumb reconstruction with a double flap after thumb replantation failure using a reverse homodigital dorsoulnar flap and a cross-finger flap
| Archives of Hand and Microsurgery |
| 2022 | Evaluating oxygen shielding effect using glycerin or vacuum with varying temperature on 3D printed photopolymer in post-polymerization | JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
| 2022 | Sleeve insert scan body to predict implant placement position by using implant surgical guides: A dental technique | JOURNAL OF PROSTHETIC DENTISTRY |
| 2022 | Accuracy of Bite Registration Using Intraoral Scanner Based on Data Trimming Strategy for Fremitus Teeth
| Journal of Korean Dental Science |
| 2022 | Influence of different postcuring parameters on mechanical properties and biocompatibility of 3D printed crown and bridge resin for temporary restorations | JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
| 2022 | Evaluating the Precision of Automatic Segmentation of Teeth, Gingiva and Facial Landmarks for 2D Digital Smile Design Using Real-Time Instance Segmentation Network
| JOURNAL OF CLINICAL MEDICINE |
| 2022 | Dental students' perceptions on a simulated practice using patient-based customised typodonts during the transition from preclinical to clinical education | EUROPEAN JOURNAL OF DENTAL EDUCATION |
| 2021 | Effects of the Washing Time and Washing Solution on the Biocompatibility and Mechanical Properties of 3D Printed Dental Resin Materials
| POLYMERS |
| 2021 | Evaluating the Three-Dimensional Printing Accuracy of Partial-Arch Models According to Outer Wall Thickness: An In Vitro Study
| MATERIALS |
| 2021 | Evaluation of Dimensional Changes during Postcuring of a Three-Dimensionally Printed Denture Base According to the Curing Time and the Time of Removal of the Support Structure: An In Vitro Study
| APPLIED SCIENCES-BASEL |
| 2021 | Evaluation of Dimensional Changes According to Aging Period and Postcuring Time of 3D-Printed Denture Base Prostheses: An In Vitro Study
| MATERIALS |
| 2021 | Effects of Artificial Tooth Brushing and Hydrothermal Aging on the Mechanical Properties and Color Stability of Dental 3D Printed and CAD/CAM Materials
| MATERIALS |
| 2021 | Alteration of the Occlusal Vertical Dimension for Prosthetic Restoration Using a Target Tracking System
| APPLIED SCIENCES-BASEL |
| 2021 | Effect of Acid Mixtures on Surface Properties and Biaxial Flexural Strength of As-Sintered and Air-Abraded Zirconia
| MATERIALS |
| 2021 | Restorative Space Analysis by Jaw Motion Tracking Using a Template in Completely Edentulous Patients
| APPLIED SCIENCES-BASEL |
| 2021 | Effects of Groove Sealing of the Posterior Occlusal Surface and Offset of the Internal Surface on the Internal Fit and Accuracy of Implant Placements Using 3D-Printed Surgical Guides: An In Vitro Study
| POLYMERS |
| 2021 | Effects of Postcuring Temperature on the Mechanical Properties and Biocompatibility of Three-Dimensional Printed Dental Resin Material
| POLYMERS |
| 2021 | A Comparison of Accuracy of Different Dental Restorative Materials between Intraoral Scanning and Conventional Impression-Taking: An In Vitro Study
| MATERIALS |
| 2021 | Evaluation of the Trueness of Digital Implant Impressions According to the Implant Scan Body Orientation and Scanning Method
| APPLIED SCIENCES-BASEL |
| 2021 | Influence of Edentulous Conditions on Intraoral Scanning Accuracy of Virtual Interocclusal Record in Quadrant Scan
| APPLIED SCIENCES-BASEL |
| 2021 | Color and Translucency Stability of Three-Dimensional Printable Dental Materials for Crown and Bridge Restorations
| MATERIALS |
| 2021 | Accuracy Improvement of Intraoral Scanning and Buccal Bite Registration Using Healing Abutment as Landmarks: An In Vitro Study
| APPLIED SCIENCES-BASEL |
| 2021 | Accuracy of Implant Position Reproduction According to Exposed Length of the Scan Body during Optical Scanning: An In Vitro Study
| APPLIED SCIENCES-BASEL |
| 2021 | Mounting casts on a mechanical articulator by using digital multisource data: A dental technique | JOURNAL OF PROSTHETIC DENTISTRY |
| 2020 | Comparison between Occlusal Errors of Single Posterior Crowns Adjusted Using Patient Specific Motion or Conventional Methods
| APPLIED SCIENCES-BASEL |
| 2020 | Evaluation of the 3D Printing Accuracy of a Dental Model According to Its Internal Structure and Cross-Arch Plate Design: An In Vitro Study
| MATERIALS |
| 2020 | Effects of Post-Curing Time on the Mechanical and Color Properties of Three-Dimensional Printed Crown and Bridge Materials
| POLYMERS |
| 2020 | Evaluation of the Color Stability of 3D-Printed Crown and Bridge Materials against Various Sources of Discoloration: An In Vitro Study
| MATERIALS |
| 2020 | Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations | JOURNAL OF PROSTHETIC DENTISTRY |
| 2020 | 의치진료 경험 후 치과대학 학생들의 임상진료능력에 대한 자기인식도
| Journal of Korean Academy of Prosthodontics (대한치과보철학회지) |
| 2020 | Effect of Pressure and Particle Size During Aluminum Oxide Air Abrasion on the Flexural Strength of Disperse-Filled Composite and Polymer-Infiltrated Ceramic Network Materials
| POLYMERS |
| 2020 | Transfer Learning via Deep Neural Networks for Implant Fixture System Classification Using Periapical Radiographs
| JOURNAL OF CLINICAL MEDICINE |
| 2020 | Digital approach for production of interim implant-supported fixed restoration with a prefabricated implant component library | JOURNAL OF PROSTHETIC DENTISTRY |
| 2020 | A Generation Process for a Three-Dimensional Digital Cast That Simulates the Oral Cavity by Using an Existing Maxillary Obturator | JOURNAL OF PROSTHETIC DENTISTRY |
| 2019 | Finite element analysis of the effect of novel Lock Screw system preventing abutment screw loosening
| Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지) |
| 2019 | Accuracy of Scanned Stock Abutments Using Different Intraoral Scanners: An In Vitro Study | JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY |
| 2019 | 편측 소수 잔존치 증례에서 CAD software를 활용한 planning 및 임플란트 서베이드 고정성 보철물을 이용한 국소의치 수복 : 증례보고
| Journal of Korean Academy of Prosthodontics (대한치과보철학회지) |
| 2019 | 디지털 스캔 데이터를 활용한 무치악 치조제 관계의 평가와 인공치 선택 : 편측 교차교합의 가철성 의치 수복 증례
| Journal of Korean Academy of Prosthodontics (대한치과보철학회지) |
| 2019 | The Impact of Metal Artifacts Within Cone Beam Computed Tomography Data on the Accuracy of Computer-Based Implant Surgery: An In Vitro Study | INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS |
| 2019 | A Digital Implant Custom Tray Fabrication Method Using the Design Process for Simulating the Position of the Impression Copings and 3D Printing Technology | JOURNAL OF PROSTHETIC DENTISTRY |
| 2019 | Computer-based Implant Planning Involving a Prefabricated Custom Tray With Alumina Landmark Structures | JOURNAL OF PROSTHETIC DENTISTRY |
| 2019 | Effect of wet storage on the bioactivity of ultraviolet light- and non-thermal atmospheric pressure plasma-treated titanium and zirconia implant surfaces | MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS |
| 2019 | Load-Bearing Capacity of Posterior CAD/CAM Implant-Supported Fixed Partial Dentures Fabricated with Different Esthetic Materials | INTERNATIONAL JOURNAL OF PROSTHODONTICS |
| 2019 | A new minimally invasive guided endodontic microsurgery by cone beam computed tomography and 3-dimensional printing technology
| Restorative Dentistry & Endodontics |
| 2019 | Assessment of metal sleeve-free 3D-printed implant surgical guides | DENTAL MATERIALS |
http://orcid.org/0000-0002-7834-2524
(57202561988)
