| 2024 | Three-axis load analysis of high-speed handpiece on dental training teeth and computer-aided design/computer-aided manufacturing blocks | JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
| 2023 | A prospective multicenter clinical study on the efficiency of detachable ball- and spring-retained implant prosthesis
| JOURNAL OF ADVANCED PROSTHODONTICS |
| 2023 | 3D analysis of occlusal registration through geometry embedded library matching between quadrant and full-arch digital impression | CLINICAL ORAL INVESTIGATIONS |
| 2023 | Effects of heat-treatment methods on cytocompatibility and mechanical properties of dental products 3D-printed using photopolymerized resin
| JOURNAL OF PROSTHODONTIC RESEARCH |
| 2022 | Influence of postwashing process on the elution of residual monomers, degree of conversion, and mechanical properties of a 3D printed crown and bridge materials | DENTAL MATERIALS |
| 2022 | Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study | JOURNAL OF DENTISTRY |
| 2022 | Evaluation of different registration methods and dental restorations on the registration duration and accuracy of cone beam computed tomography data and intraoral scans: a retrospective clinical study | CLINICAL ORAL INVESTIGATIONS |
| 2022 | A Case of Full-mouth Rehabilitation using a Digital twin Based on Multi-source Data in a Patient with Vertical Dimension Loss due to Multiple Tooth wear and Fractures
| Journal of Implantology and Applied Sciences |
| 2022 | A Digital Workflow for the Fabrication of a Milled Removable Partial Denture
| INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH |
| 2022 | Evaluation of Mechanical Properties of Three dimensional Printed Flexible Denture Resin according to Post-polymerization Conditions: A Pilot Study
| Journal of Korean Dental Science |
| 2022 | Sleeve insert scan body to predict implant placement position by using implant surgical guides: A dental technique | JOURNAL OF PROSTHETIC DENTISTRY |
| 2022 | Accuracy of Bite Registration Using Intraoral Scanner Based on Data Trimming Strategy for Fremitus Teeth
| Journal of Korean Dental Science |
| 2022 | Influence of different postcuring parameters on mechanical properties and biocompatibility of 3D printed crown and bridge resin for temporary restorations | JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
| 2022 | Accuracy of Surgical Robot System Compared to Surgical Guide for Dental Implant Placement: A Pilot Study
| Implantology |
| 2022 | Dental students' perceptions on a simulated practice using patient-based customised typodonts during the transition from preclinical to clinical education | EUROPEAN JOURNAL OF DENTAL EDUCATION |
| 2022 | Application of additive and subtractive manufacturing technology for a digitally fabricated removable partial denture after a partial maxillectomy: A clinical report | JOURNAL OF PROSTHETIC DENTISTRY |
| 2021 | Evaluating the Three-Dimensional Printing Accuracy of Partial-Arch Models According to Outer Wall Thickness: An In Vitro Study
| MATERIALS |
| 2021 | Evaluation of Dimensional Changes during Postcuring of a Three-Dimensionally Printed Denture Base According to the Curing Time and the Time of Removal of the Support Structure: An In Vitro Study
| APPLIED SCIENCES-BASEL |
| 2021 | Evaluation of Dimensional Changes According to Aging Period and Postcuring Time of 3D-Printed Denture Base Prostheses: An In Vitro Study
| MATERIALS |
| 2021 | Effects of Artificial Tooth Brushing and Hydrothermal Aging on the Mechanical Properties and Color Stability of Dental 3D Printed and CAD/CAM Materials
| MATERIALS |
| 2021 | Fabrication of Metal-Reinforced Complete Dentures Using the CAD-CAM Technique
| APPLIED SCIENCES-BASEL |
| 2021 | Alteration of the Occlusal Vertical Dimension for Prosthetic Restoration Using a Target Tracking System
| APPLIED SCIENCES-BASEL |
| 2021 | Effect of Acid Mixtures on Surface Properties and Biaxial Flexural Strength of As-Sintered and Air-Abraded Zirconia
| MATERIALS |
| 2021 | Restorative Space Analysis by Jaw Motion Tracking Using a Template in Completely Edentulous Patients
| APPLIED SCIENCES-BASEL |
| 2021 | Effects of Groove Sealing of the Posterior Occlusal Surface and Offset of the Internal Surface on the Internal Fit and Accuracy of Implant Placements Using 3D-Printed Surgical Guides: An In Vitro Study
| POLYMERS |
| 2021 | A Comparison of Accuracy of Different Dental Restorative Materials between Intraoral Scanning and Conventional Impression-Taking: An In Vitro Study
| MATERIALS |
| 2021 | Evaluation of the Trueness of Digital Implant Impressions According to the Implant Scan Body Orientation and Scanning Method
| APPLIED SCIENCES-BASEL |
| 2021 | Influence of Edentulous Conditions on Intraoral Scanning Accuracy of Virtual Interocclusal Record in Quadrant Scan
| APPLIED SCIENCES-BASEL |
| 2021 | In Vitro Comparison between Metal Sleeve-Free and Metal Sleeve-Incorporated 3D-Printed Computer-Assisted Implant Surgical Guides
| MATERIALS |
| 2021 | Accuracy Improvement of Intraoral Scanning and Buccal Bite Registration Using Healing Abutment as Landmarks: An In Vitro Study
| APPLIED SCIENCES-BASEL |
| 2021 | Accuracy of Implant Position Reproduction According to Exposed Length of the Scan Body during Optical Scanning: An In Vitro Study
| APPLIED SCIENCES-BASEL |
| 2021 | Mounting casts on a mechanical articulator by using digital multisource data: A dental technique | JOURNAL OF PROSTHETIC DENTISTRY |
| 2021 | In Vivo Study for Clinical Application of Dental Stem Cell Therapy Incorporated with Dental Titanium Implants
| MATERIALS |
| 2020 | Study on the Development of Training Programs for Standardized Patients of the Practical Examination Portion of the National Dental Licensing Examination | Journal of Korean Dental Science |
| 2020 | Comparison between Occlusal Errors of Single Posterior Crowns Adjusted Using Patient Specific Motion or Conventional Methods
| APPLIED SCIENCES-BASEL |
| 2020 | Evaluation of the 3D Printing Accuracy of a Dental Model According to Its Internal Structure and Cross-Arch Plate Design: An In Vitro Study
| MATERIALS |
| 2020 | Effects of Post-Curing Time on the Mechanical and Color Properties of Three-Dimensional Printed Crown and Bridge Materials
| POLYMERS |
| 2020 | Evaluation of the Color Stability of 3D-Printed Crown and Bridge Materials against Various Sources of Discoloration: An In Vitro Study
| MATERIALS |
| 2020 | Abutment-Level Digital Impression Using Abutment Matching Algorithm, And Insurance-Covered Implant Prosthesis By Metal 3D Printing: A Case Report
| Implantology |
| 2020 | 의치진료 경험 후 치과대학 학생들의 임상진료능력에 대한 자기인식도
| Journal of Korean Academy of Prosthodontics (대한치과보철학회지) |
| 2020 | Effect of Pressure and Particle Size During Aluminum Oxide Air Abrasion on the Flexural Strength of Disperse-Filled Composite and Polymer-Infiltrated Ceramic Network Materials
| POLYMERS |
| 2020 | Transfer Learning via Deep Neural Networks for Implant Fixture System Classification Using Periapical Radiographs
| JOURNAL OF CLINICAL MEDICINE |
| 2020 | Digital approach for production of interim implant-supported fixed restoration with a prefabricated implant component library | JOURNAL OF PROSTHETIC DENTISTRY |
| 2020 | A Generation Process for a Three-Dimensional Digital Cast That Simulates the Oral Cavity by Using an Existing Maxillary Obturator | JOURNAL OF PROSTHETIC DENTISTRY |
| 2019 | 부분무치악에서 모델프리, 제로셋업 컴퓨터-가이드 임플란트 수술용 템플릿의 활용 증례
| Implantology |
| 2019 | 디지털 복제로 만든 맞춤형 인공치로 제작한 임시의치와 임플란트 수술용 템플릿을 통한 임플란트 지지형 고정성 보철 수복 증례
| Journal of Korean Academy of Prosthodontics (대한치과보철학회지) |
| 2019 | Accuracy of Scanned Stock Abutments Using Different Intraoral Scanners: An In Vitro Study | JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY |
| 2019 | 편측 소수 잔존치 증례에서 CAD software를 활용한 planning 및 임플란트 서베이드 고정성 보철물을 이용한 국소의치 수복 : 증례보고
| Journal of Korean Academy of Prosthodontics (대한치과보철학회지) |
| 2019 | The Impact of Metal Artifacts Within Cone Beam Computed Tomography Data on the Accuracy of Computer-Based Implant Surgery: An In Vitro Study | INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS |
| 2019 | Measuring the Complete-arch Distortion of an Optical Dental Impression | JOVE-JOURNAL OF VISUALIZED EXPERIMENTS |
http://orcid.org/0000-0003-1428-0122
(35325524200)
