0 264

Cited 0 times in

Development of length standard phantom for length measurement correction in x-ray image

Authors
 Hyo-Min Cho  ;  Changwoo Lee  ;  Hojae Kim  ;  Yong Tae Kim  ;  Teo Jeon Shin  ;  Bongyoung Ahn 
Citation
 REVIEW OF SCIENTIFIC INSTRUMENTS, Vol.92(8) : 084104, 2021-08 
Journal Title
 REVIEW OF SCIENTIFIC INSTRUMENTS 
Issue Date
2021-08
MeSH
Calibration ; Phantoms, Imaging ; Tomography, X-Ray Computed* ; X-Rays
Abstract
Specific tissue lengths or volumes in x-ray images are measured for diagnostic and therapeutic purposes. Measurements are used to make clinical decisions; however, the accuracy of these measurements has not been studied. In this study, based on the sources of uncertainty, an SI-traceable length standard phantom and an x-ray imaging system calibration method are proposed. The uncertainty in the length of the fabricated standard phantom is determined using a toolmaker's microscope. The sources of uncertainty in an x-ray imaging system, such as magnification, pixel-to-millimeter unit conversion, and penumbra effect, are considered, and the lengths of the phantom before and after imaging system calibration were compared. The maximum deviation of length measurements with and without calibration is (-0.11 ± 0.10) and (-3.37 ± 0.15) mm (k = 2, 95% level of confidence), respectively. The proposed phantom and calibration method can be used for calibrating x-ray images and obtaining their length correction values. Furthermore, length correction values are expected to be useful for diagnosis and treatment planning, where precise length measurements are essential
Full Text
https://aip.scitation.org/doi/pdf/10.1063/5.0057880
DOI
10.1063/5.0057880
Appears in Collections:
6. Others (기타) > Severance Hospital (세브란스병원) > 1. Journal Papers
URI
https://ir.ymlib.yonsei.ac.kr/handle/22282913/190811
사서에게 알리기
  feedback

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse

Links