0 335

Cited 0 times in

Change in the Shrinkage Forces of Composite Resins According to Controlled Deflection

DC Field Value Language
dc.contributor.author김광만-
dc.contributor.author김도현-
dc.contributor.author박성호-
dc.date.accessioned2022-09-14T01:35:24Z-
dc.date.available2022-09-14T01:35:24Z-
dc.date.issued2021-09-
dc.identifier.issn0361-7734-
dc.identifier.urihttps://ir.ymlib.yonsei.ac.kr/handle/22282913/190536-
dc.description.abstractThe aim of this study was to investigate how the polymerization shrinkage forces of composite resins change with change in deflection. Five composites, SDR (Dentsply Caulk, Milford, DE, USA), EcuSphere-Shape (DMG, Hamburg, Germany), Tetric N-Ceram Bulk Fill (Ivoclar Vivadent, Schaan, Liechtenstein), CLEARFIL AP-X (Kuraray Noritake Dental Inc., Sakazu, Kurashiki, Okayama, Japan), and Filtek Z350 XT (3M Dental Products, St Paul, MN, USA), were tested in this experiment. The polymerization shrinkage forces of the composites were measured using a custom-made tooth-deflection-mimicking device and software (R&B Inc, Daejon, Korea). In all measurements, six modes were tested: maximum-deflection, zero-deflection, and four deflection-controlled modes. For each deflection mode, the shrinkage forces were recorded continuously every 0.1 second for 180 seconds. Polymerization shrinkage and flexural modulus were also measured. Eight specimens of each material were allocated for each test. For each material, six groups of shrinkage force values were compared using one-way ANOVA and Tukey post hoc tests at a 95% confidence level. The polymerization shrinkage force of each material in each of the six deflection modes was analyzed with 95% confidence using one-way ANOVA and Tukey post hoc tests. The relationship between the force measured in the six deflection modes and the linear polymerization shrinkage and flexural modulus was analysed with 95% confidence using Pearson correlation analysis. For each material, the following held true: the shrinkage force was highest in zero-deflection mode, the force decreased as deflection increased, and the smallest force appeared in maximum-deflection mode (p<0.05). There was a high negative correlation between allowable deflection and shrinkage force in all materials.-
dc.description.statementOfResponsibilityrestriction-
dc.languageEnglish-
dc.publisherUniv. of Washington, School of Dentistry-
dc.relation.isPartOfOPERATIVE DENTISTRY-
dc.rightsCC BY-NC-ND 2.0 KR-
dc.subject.MESHComposite Resins* / therapeutic use-
dc.subject.MESHDental Materials*-
dc.subject.MESHMaterials Testing-
dc.subject.MESHPolymerization-
dc.subject.MESHSurface Properties-
dc.titleChange in the Shrinkage Forces of Composite Resins According to Controlled Deflection-
dc.typeArticle-
dc.contributor.collegeCollege of Dentistry (치과대학)-
dc.contributor.departmentDept. of Dental Biomaterials and Bioengineering (치과생체재료공학교실)-
dc.contributor.googleauthorI-S Yoo-
dc.contributor.googleauthorD Kim-
dc.contributor.googleauthorK Kim-
dc.contributor.googleauthorS-H Park-
dc.identifier.doi10.2341/20-196-L-
dc.contributor.localIdA00312-
dc.contributor.localIdA00389-
dc.contributor.localIdA01514-
dc.relation.journalcodeJ02426-
dc.identifier.eissn1559-2863-
dc.identifier.pmid35486505-
dc.identifier.urlhttps://meridian.allenpress.com/operative-dentistry/article/46/5/577/480864/Change-in-the-Shrinkage-Forces-of-Composite-Resins-
dc.contributor.alternativeNameKim, Kwang Mahn-
dc.contributor.affiliatedAuthor김광만-
dc.contributor.affiliatedAuthor김도현-
dc.contributor.affiliatedAuthor박성호-
dc.citation.volume46-
dc.citation.number5-
dc.citation.startPage577-
dc.citation.endPage588-
dc.identifier.bibliographicCitationOPERATIVE DENTISTRY, Vol.46(5) : 577-588, 2021-09-
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Conservative Dentistry (보존과학교실) > 1. Journal Papers
2. College of Dentistry (치과대학) > Dept. of Dental Biomaterials and Bioengineering (치과생체재료공학교실) > 1. Journal Papers

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.