0 19

Cited 0 times in

레이저 자가납착이 치과교정용 선재에 미치는 영향

Other Titles
 EFFECTS OF LASER WELDING ON ORTHODONTIC WIRES 
Authors
 오성산  ;  김광만  ;  김경남 
Citation
 Journal of the Korean Research Society for Dental Materials (대한치과기재학회지), Vol.23(1) : 7-24, 1996-01 
Journal Title
Journal of the Korean Research Society for Dental Materials(대한치과기재학회지)
ISSN
 1225-1631 
Issue Date
1996-01
Abstract
nie objectives of this study were to evaluate physical properties of the laser welded orthodontic wires. The tensile fracture 1(kId, micro Vikers hardness and microstructures on the welded area of four different orthodontic wires, Cr-Co, Stainless ,ted, `I NIA, Ni-Ti, were tested ´I´he results were obtained as follows; 1. All 4 materials used in this study were able to be welded by laser. Cr-Co and S-S wires could be"welded ´ on both lap and butt joints, TNIA wires were a part of lap and all butt joints, and Ni-Ti wires were for lap joints only. The tensile-fracture loads of Cr-Co and S-S wires were higher on lap joint than butt joint welding and it shoved higher Viiiue at 7-12J lap welding of Cr-Co wires and at more than 6J lap welding of S-S wires than control(p<0.05). 3, The tensile-fracture loads of TMA wires were higher on butt joint than lap joint welding and it decreased as the energy l level increased, and every experin´}ental group showed lower value than control(p<0.05), 4. Ni-Ti wires were higher tensile-fracture load than control at 8-IIJ(p<0.05): 7. "Fhu hardness of Cr-Co and S-S wires were higher than TNIA and Ni-Ti wires. The hardness of laser exposed area of "Cr-Co nd S-S-wires decreased-, whilethat of TMA and Ni-Ti-wires tended to increase. x ,. 1 i ermal effect limits of laser welded areas were 0.5mm for Cr-Co and´S-S wires, 0.6mm for TMA wires and O.Vmm for Ni Ti . i mi(´rc stricture views all the experimental groups showed clear boundary of thermal effect limits and microstructe a1)1)eared at Cr-Co, S-S and TMA wires. In Cr-Co, S-S and Ni-Ti wires, laser welding showed the higher bonding strength than electrical resistance spot welding. 1´he laser welding could be the good alternative way to use in, the routine orthodontic wire.
Full Text
http://www.dbpia.co.kr/Article/3410706
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Dental Biomaterials and Bioengineering (치과생체재료공학교실) > 1. Journal Papers
Yonsei Authors
Kim, Kyoung Nam(김경남)
URI
https://ir.ymlib.yonsei.ac.kr/handle/22282913/183580
사서에게 알리기
  feedback

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse

Links