(An) experimental study on retentive capacities of clasps effected by vertical distance in an undercut
Authors
전영식
Issue Date
1987
Description
치의학과/석사
Abstract
[한글]
가철성 국소의치의 적절한 유지력을 기 위해서는 적합한 Clasp설계가 요구되며 아울러 Clasp가 효과적인 유지기능을 발휘할 수 있도록 기대치의 유지부 형성이 이루어져야 한다.
저자는 동일한 양의 undercut에서 retentive clasp arm의 첨단이 위치하는 수직거리에 따른 유지력의 변화를 비교 검토하기 위하여 0.25mm의 undercut에 수직거리를 3mm와 1.5mm로 변화시켜 Aker's clasp와 Ⅰ-bar clasp가 나타내는 유지력을 측정하고 이를 분석함으로서 다음과 같은 결론을 얻었다.
1. Aker's clasp의 유지력은 수직거리가 짧은 경우에서 더 크게 나타났다
2. 1-bar clasp의 유지력은 수직거리에 영향을 받기 않았다.
3. 모든 시편의 유기력 측정에서 Ⅰ-bar clasp는 Aker's clasp에 비하며 더 큰 유지력을 나타내었다.
[영문]
To investigate the relationship between the retentive capacity of clasp and the vertical distance in an undercut, the author measured the retentive forces of Aker's clasps and Ⅰ-bar clasps in the undercut depth of 0.25mm, varing the vertical distance from 3mm to 1.5mm and analyzed statistically.
The following results were obtained;
1. The retentive force of Aker's clasp in vertical distance of 1.5mm was higher than that in vertical distance of 3mm.
2. The retentive force of Ⅰ-bar clasp was not affected by the vertical distance.
3. In all test specimens, Ⅰ-bar clasps exerted more retentive forces than Aker's clasps.