2 240

Cited 0 times in

The Marginal Fit of CAD-CAM Zirconia Cores with Different Proximal Margin Configurations

Authors
 O.E. Puntsag  ;  E.K. Bae  ;  Keun Woo Lee  ;  Jae Hoon Lee 
Citation
 Key Engineering Materials, Vol.330~332 : 1409-1412, 2007 
Journal Title
 Key Engineering Materials 
ISSN
 1013-9826 
Issue Date
2007
Abstract
This study evaluated the marginal fit of CAD-CAM Zirconia cores with different proximal height. Thirty Zirconia cores and ten metal ceramics crowns were used to evaluate the marginal gap. The marginal fit was determined to be perpendicular to the tooth axis between the most apical point on the coping margin (core) and the reference marks on the mesial, distal, labial, and palatal surfaces of the die at several key stages of crown fabrication; before porcelain built-up, after body porcelain built-up, and after glazing. Additionally, an opaque stage for the metal ceramic copings was compared as well. Each measurement was carried out with a microscope. The means of gaps among the groups were 58±27 -m, 69±23 -m, 89±29 -m and 80±28 -m, groups I, II, III and IV, respectively. In relation to the proximal and labiopalatal surfaces there were no statistical difference among the groups, except group I. No significant differences were observed in firing stages of all groups. The findings of this study showed that the mean marginal gap of Zirconia cores with different proximal heights fell well within the acceptable clinical ranges.
Full Text
http://www.scientific.net/KEM.330-332.1409
DOI
10.4028/www.scientific.net/KEM.330-332.1409
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Prosthodontics (보철과학교실) > 1. Journal Papers
Yonsei Authors
Lee, Keun Woo(이근우) ORCID logo https://orcid.org/0000-0002-3153-190X
Lee, Jae Hoon(이재훈) ORCID logo https://orcid.org/0000-0003-2281-8885
URI
https://ir.ymlib.yonsei.ac.kr/handle/22282913/96751
사서에게 알리기
  feedback

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse