136 229

Cited 0 times in

Accuracy of computer-guided implant placement in anterior regions

Other Titles
 컴퓨터를 이용한 전치부 임플란트 수술가이드의 정확성 
Authors
 방일흠 
College
 College of Medicine (의과대학) 
Department
 Others (기타) 
Degree
박사
Issue Date
2021-08
Abstract
Statement of problem. Implant placement in the anterior regions is often challenging because of limited space and bone volume availability. Purpose. The purpose of this clinical study was to investigate the accuracy of computer-guided surgery with a long drill key to place implants in the anterior regions. Material and methods. Computer-guided implant surgery was performed for 32 participants requiring implants in anterior regions. The procedure involved using a 12-mm-long drill key to guide the 2.0-mm-diameter drill. Deviations between the planned and actual implant positions were evaluated by using cone beam computed tomography (CBCT) scans obtained before and after surgery. A t test was used for comparisons between the planned and placed implants and to determine the influence of the arch (maxilla/mandible) and time (immediate/delayed) on accuracy. Results. A total of 40 implants (20 implants in the maxilla and 20 implants in the mandible) were placed. The mean linear deviation was 0.46 mm (range, 0–1.15 mm) for the implant shoulder and 0.67 mm (range, 0.14–1.19 mm) for the implant apex. The mean angular deviation was 1.40 degrees (range, 0.30–2.57 degrees). The mean depth deviation was 0.15 mm (range, 0.10–0.82 mm). Conclusions. This clinical study showed that the accuracy of computer-guided implant placement may be enhanced by using a long drill key and may thus enable more accurate implant placement in anterior regions.

치과 임플란트 식립에서 전치 부에 골 폭 즉 가용 골의 볼륨이 부족하여 임플란트의 식립이 종종 어려움을 겪게 됩니다. 임상에서 전치 부 식립 시 작은 직경의 임플란트를 선택하거나 혹은 골이식이 동반된 임플란트 식립 술을 선택하기도 합니다. 본 임상 연구의 목적은 전치 부에 임플란트를 정확한 식립을 위해 긴 드릴 키를 사용하여 컴퓨터를 이용한 임플란트 수술 가이드의 정확성을 평가하는 것입니다. 실험 방법은 전치 부에 임플란트 식립이 필요한 32명의 환자를 대상으로 하고 컴퓨터를 이용한 임플란트 수술 가이드를 제작하여 수술에 사용했습니다. 2.0mm 직경의 12mm 긴 드릴 키와 9mm의 짧은 드릴 키를 사용 비교하였으며 실제 임플란트 식립 위치와 계획된 임플란트 위치 사이의 편차를 측정하였습니다. 편차측정은 수술 전, 후의 촬영된 CBCT(cone beam computed tomography)를 이용하였습니다. 실험은 식립 위치 (상악 전치/하악 전치) 부 비교 및 식립 시간 (즉시 식립/ 지연 식립)을 비교하여 정확도에 미치는 영향을 결정하는 데 사용되었습니다. 각각 상악 전치 20개, 하악 전치 20개 임플란트가 식립 되었습니다. 평균 편차는 임플란트 숄드 0.46mm (0-1.15mm)이고 임플란트 정점 0.67mm (0.14-1.19mm)였습니다. 평균 각도 오차는 1.40도 (0.3-2.57도) , 식립 깊이 오차는 0.15mm(0.10-0.83)였습니다. 결론. 컴퓨터를 이용한 임플란트 수술 가이드에서 긴 드릴 키를 사용하는 것이 식립의 정확도를 향상할 수 있으며 또한 골 폭이 부족한 전치 부 위치에서도 정확한 임플란트의 식립이 가능하게 할 수 있음을 보여주었습니다.
Files in This Item:
TA02990.pdf Download
Appears in Collections:
1. College of Medicine (의과대학) > Others (기타) > 3. Dissertation
URI
https://ir.ymlib.yonsei.ac.kr/handle/22282913/185514
사서에게 알리기
  feedback

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse

Links