0 12

Cited 0 times in

Fabrication of a removable partial denture combining conventional and digital techniques

Authors
 Kyung Chul Oh  ;  Jeongho Jeon  ;  Jee-Hwan Kim 
Citation
 JOURNAL OF PROSTHETIC DENTISTRY, Vol.125(4) : 588-591, 2021-04 
Journal Title
 JOURNAL OF PROSTHETIC DENTISTRY 
ISSN
 0022-3913 
Issue Date
2021-04
MeSH
Computer-Aided Design ; Denture, Partial, Removable* ; Software ; Tooth, Artificial ; Workflow
Abstract
This article describes a combined conventional and digital workflow for fabricating removable partial dentures (RPDs). After scanning the dental cast and RPD framework assembly, artificial teeth and denture base regions were designed using computer-aided design software. The artificial teeth and denture base assembly was milled as a single structure by using a wax disk and then placed on the RPD framework. The artificial teeth were additionally milled from a polymethyl methacrylate disk. Conventional procedures were followed for denture investment until the wax elimination procedure, after which the assembly was replaced with the artificial teeth in the cope of the flasks, and the denture resin material was injected to process the RPD. This technique enabled the RPD to be fabricated in the same form as the design state.
Full Text
https://www.sciencedirect.com/science/article/pii/S0022391320301402
DOI
10.1016/j.prosdent.2020.01.046
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Prosthodontics (보철과학교실) > 1. Journal Papers
Yonsei Authors
Kim, Jee Hwan(김지환) ORCID logo https://orcid.org/0000-0002-0872-4906
Oh, Kyung Chul(오경철) ORCID logo https://orcid.org/0000-0003-4584-2597
URI
https://ir.ymlib.yonsei.ac.kr/handle/22282913/182439
사서에게 알리기
  feedback

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse

Links