253 370

Cited 20 times in

Incorporating Aminated Nanodiamonds to Improve the Mechanical Properties of 3D-Printed Resin-Based Biomedical Appliances

DC Field Value Language
dc.contributor.author권재성-
dc.contributor.author최성환-
dc.date.accessioned2020-06-17T00:49:06Z-
dc.date.available2020-06-17T00:49:06Z-
dc.date.issued2020-04-
dc.identifier.urihttps://ir.ymlib.yonsei.ac.kr/handle/22282913/176139-
dc.description.abstractThe creation of clinically patient-specific 3D-printed biomedical appliances that can withstand the physical stresses of the complex biological environment is an important objective. To that end, this study aimed to evaluate the efficacy of aminated nanodiamonds (A-NDs) as nanofillers in biological-grade acrylate-based 3D-printed materials. Solution-based mixing was used to incorporate 0.1 wt% purified nanodiamond (NDs) and A-NDs into UV-polymerized poly(methyl methacrylate) (PMMA). The ND and A-ND nanocomposites showed significantly lower water contact angles (p < 0.001) and solubilities (p < 0.05) compared to those of the control. Both nanocomposites showed markedly improved mechanical properties, with the A-ND-containing nanocomposite showing a statistically significant increase in the flexural strength (p < 0.001), elastic modulus (p < 0.01), and impact strength (p < 0.001) compared to the control and ND-containing groups. The Vickers hardness and wear-resistance values of the A-ND-incorporated material were significantly higher (p < 0.001) than those of the control and were comparable to the values observed for the ND-containing group. In addition, trueness analysis was used to verify that 3D-printed orthodontic brackets prepared with the A-ND- and ND-nanocomposites exhibited no significant differences in accuracy. Hence, we conclude that the successful incorporation of 0.1 wt% A-ND in UV-polymerized PMMA resin significantly improves the mechanical properties of the resin for the additive manufacturing of precisive 3D-printed biomedical appliances.-
dc.description.statementOfResponsibilityopen-
dc.languageEnglish-
dc.publisherMDPI AG-
dc.relation.isPartOfNANOMATERIALS-
dc.rightsCC BY-NC-ND 2.0 KR-
dc.titleIncorporating Aminated Nanodiamonds to Improve the Mechanical Properties of 3D-Printed Resin-Based Biomedical Appliances-
dc.typeArticle-
dc.contributor.collegeCollege of Dentistry (치과대학)-
dc.contributor.departmentDept. of Dental Biomaterials and Bioengineering (치과생체재료공학교실)-
dc.contributor.googleauthorUtkarsh Mangal-
dc.contributor.googleauthorJi-Young Seo-
dc.contributor.googleauthorJaehun Yu-
dc.contributor.googleauthorJae-Sung Kwon-
dc.contributor.googleauthorSung-Hwan Choi-
dc.identifier.doi10.3390/nano10050827-
dc.contributor.localIdA00247-
dc.contributor.localIdA04083-
dc.relation.journalcodeJ03655-
dc.identifier.eissn2079-4991-
dc.identifier.pmid32357463-
dc.subject.keywordadditive manufacturing-
dc.subject.keywordaminated nanodiamond-
dc.subject.keywordmechanical properties-
dc.subject.keywordnanocomposites-
dc.subject.keywordpoly (methyl methacrylate)-
dc.contributor.alternativeNameKwon, Jae-Sung-
dc.contributor.affiliatedAuthor권재성-
dc.contributor.affiliatedAuthor최성환-
dc.citation.volume10-
dc.citation.number5-
dc.citation.startPageE827-
dc.identifier.bibliographicCitationNANOMATERIALS, Vol.10(5) : E827, 2020-04-
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Dental Biomaterials and Bioengineering (치과생체재료공학교실) > 1. Journal Papers
2. College of Dentistry (치과대학) > Dept. of Orthodontics (교정과학교실) > 1. Journal Papers

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.