448 529

Cited 0 times in

(A) prospective, split-mouth, clinical study of orthodontic titanium miniscrews with machined and acid-etched surfaces

DC Field Value Language
dc.contributor.author박효진-
dc.date.accessioned2019-01-02T16:46:22Z-
dc.date.available2019-01-02T16:46:22Z-
dc.date.issued2018-
dc.identifier.urihttps://ir.ymlib.yonsei.ac.kr/handle/22282913/166473-
dc.description치의학과-
dc.description.abstractThe aim of this study was to determine whether the success rate and primary stability of surface-treated miniscrews differed significantly from those of non-treated miniscrews. Patients who required one or more miniscrews for the same reason in each quadrant were recruited into a single-blinded, split-mouth, randomized, controlled trial with a 1:1 allocation ratio. Self-drilling miniscrews with two surface types were used; with no surface treatment and with an acid-etched surface treatment. The cumulative success rate and primary stability of each type of miniscrew was examined, and factors potentially affecting the success and failure of miniscrews were investigated. Forty patients were included in the study, with a total of 98 orthodontic miniscrews. 1. The overall success rate was 88.8 %, and the respective success rates for acid-etched and machined surface miniscrews were 91.8 % and 85.7 %. 2. The respective mean insertion torques were 13.62 ± 5.95 N•cm for acid-etched miniscrews and 13.38 ± 4 N•cm for machined surface miniscrews. Periotest values measured immediately after insertion were -0.50 ± 2.77 for acid-etched miniscrews and -0.28 ± 3.36 for machined surface miniscrews. There were no statistically significant differences between the two types of miniscrews 3. There was no significant difference in the mean insertion torques and periotest values according to surface treatment and jaw. 4. In the analysis of risk factors that affect the stability of orthodontic miniscrews, the success rate of miniscrews was low in cases of distalization and open bite group, which was statistically significant. Neither the success rate nor the primary stability of acid-etched surface miniscrews and machined surface miniscrews differed significantly. There is a high possibility that miniscrews will fall out in patients who have an open bite or require total distalization.-
dc.description.statementOfResponsibilityopen-
dc.publisher연세대학교-
dc.rightsCC BY-NC-ND 2.0 KR-
dc.rightshttps://creativecommons.org/licenses/by-nc-nd/2.0/kr/-
dc.title(A) prospective, split-mouth, clinical study of orthodontic titanium miniscrews with machined and acid-etched surfaces-
dc.title.alternative표면 산처리 유무에 따른 교정용 미니스크류의 안정성 평가 : 전향적 임상 연구-
dc.typeThesis-
dc.description.degree박사-
dc.contributor.alternativeNamePark, Hyo-Jin-
dc.type.localDissertation-
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Advanced General Dentistry (통합치의학과) > 3. Dissertation

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.