258 258

Cited 0 times in

Flexural strength of various kinds of the resin bridges fabricated with 3D printing

Other Titles
 3D 프린팅으로 제작된 여러 종류의 레진브릿지의 굴곡강도에 대한 연구 
Authors
 Sang-Mo Park  ;  Seong-Kyun Kim  ;  Ji-Man Park  ;  Jang-Hyun Kim  ;  Yoon-Tae Jeon  ;  Jai-Young Koak 
Citation
 Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지), Vol.33(4) : 260-268, 2017 
Journal Title
 Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지) 
ISSN
 2233-4084 
Issue Date
2017
Keywords
3D print ; flexural strength ; digital light-processing printer ; 3 unit-fixed dental prosthesis ; additive manufacturing
Abstract
Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based) , DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of 30° from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, 1119 ± 305 N; DP-1, 619 ± 150 N; DT-1, 413 ± 65 N. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.
Files in This Item:
T201706227.pdf Download
DOI
10.14368/jdras.2017.33.4.260
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Prosthodontics (보철과학교실) > 1. Journal Papers
Yonsei Authors
Park, Ji-Man(박지만) ORCID logo https://orcid.org/0000-0003-0018-1166
URI
https://ir.ymlib.yonsei.ac.kr/handle/22282913/164978
사서에게 알리기
  feedback

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse

Links