321 182

Cited 0 times in

골절정복겸자가 하악골 골절정복에 미치는 효과에 관한 광탄성 연구

Other Titles
 A PHOTOELASTIC STUDY ON EFFECTS OF BONE REDUCTION FORCEPS ON MANDIBULAR FRACTURE REDUCTION 
Authors
 박진형  ;  최병호  ;  류태민  ;  허진영 
Citation
 Journal of the Korean Association of Oral and Maxillofacial Surgeons (대한구강악안면외과학회지), Vol.28(6) : 464-471, 2002 
Journal Title
 Journal of the Korean Association of Oral and Maxillofacial Surgeons (대한구강악안면외과학회지) 
ISSN
 1225-1105 
Issue Date
2002
Abstract
The purpose of this study was to evaluate the stress patterns within fractured mandibles generated by reduction forceps and to determine the optimal position of the reduction forcep. Twenty-seven mandibular models were fabricated using a photoelastic resin. Each of the three sets of mandible models prepared was osteotomized according to one of three different fracture types(symphysis, parasymphysis and body fractures). After reducing the cut segments, a reduction forcep was placed into different engagement holes to compress the segments. Photoelastic stress analysis was used to visualize the stress patterns within the fractured mandiblular models generated by the reduction forcep. In the case of symphysis or parasymphysis fractures, an optimum distribution of stress over the fracture site was achieved when placing the reduction forcep more than 12.5㎜on either side of the fracture line between the midway level bisecting the mandible and 5㎜below the level. In the case of body fractures, optimum stress distribution was achieved when the reduction forcep was placed more than 15㎜from the fracture line on the midway level. In conclusion, a correct use of reduction forceps helps to provide a precise threedimensional reduction for mandibular fractures. The purpose of this study was to evaluate the stress patterns within fractured mandibles generated by reduction forceps and to determine the optimal position of the reduction forcep. Twenty-seven mandibular models were fabricated using a photoelastic resin. Each of the three sets of mandible models prepared was osteotomized according to one of three different fracture types(symphysis, parasymphysis and body fractures). After reducing the cut segments, a reduction forcep was placed into different engagement holes to compress the segments. Photoelastic stress analysis was used to visualize the stress patterns within the fractured mandiblular models generated by the reduction forcep. In the case of symphysis or parasymphysis fractures, an optimum distribution of stress over the fracture site was achieved when placing the reduction forcep more than 12.5mm on either side of the fracture line between the midway level bisecting the mandible and 5mm below the level. In the case of body fractures, optimum stress distribution was achieved when the reduction forcep was placed more than 15mm from the fracture line on the midway level. In conclusion, a correct use of reduction forceps helps to provide a precise threedimensional reduction for mandibular fractures.
Files in This Item:
T200209385.pdf Download
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Oral and Maxillofacial Surgery (구강악안면외과학교실) > 1. Journal Papers
Yonsei Authors
Choi, Byung Ho(최병호)
URI
https://ir.ymlib.yonsei.ac.kr/handle/22282913/144381
사서에게 알리기
  feedback

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse