0 101

Metal release fr simulated fixed orthodontic appliance

DC FieldValueLanguage
dc.contributor.author황충주-
dc.date.accessioned2016-02-19T11:13:38Z-
dc.date.available2016-02-19T11:13:38Z-
dc.date.issued2001-
dc.identifier.issn0889-5406-
dc.identifier.urihttps://ir.ymlib.yonsei.ac.kr/handle/22282913/142677-
dc.description.abstractMost orthodontic appliances and archwires are stainless steel or nickel-titanium (NiTi) alloys that can release metal ions, with saliva as the medium. To measure metal released from the fixed orthodontic appliances currently in use, we fabricated simulated fixed orthodontic appliances that corresponded to half of the maxillary arch and soaked them in 50 mL of artificial saliva (pH 6.75 +/- 0.15, 37 degrees C) for 3 months. We used brackets, tubes, and bands made by Tomy (Tokyo, Japan). Four groups were established according to the appliance manufacturer and the type of metal in the .016 x .022-in archwires. Groups A and B were stainless steel archwires from Ormco (Glendora, Calif) and Dentaurum (Ispringen, Germany), respectively, and groups C and D were both NiTi archwires with Ormco's copper NiTi and Tomy's Bioforce sentalloy, respectively. Stainless steel archwires were heat treated in an electric furnace at 500 degrees C for 1 minute and quenched in water. We measured the amount of metal released from each group by immersion time. Our conclusions were as follows: (1) there was no increase in the amount of chromium released after 4 weeks in group A, 2 weeks in group B, 3 weeks in group C, and 8 weeks in group D; (2) there was no increase in the amount of nickel released after 2 weeks in group A, 3 days in group B, 7 days in group C, and 3 weeks in group D; and (3) there was no increase in the amount of iron released after 2 weeks in group A, 3 days in group B, and 1 day in groups C and D. In our 3-month-long investigation, we saw a decrease in metal released as immersion time increased.-
dc.description.statementOfResponsibilityopen-
dc.format.extent383~391-
dc.relation.isPartOfAmerican Journal of Orthodontics and Dentofacial Orthopedics-
dc.rightsCC BY-NC-ND 2.0 KR-
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/2.0/kr/-
dc.titleMetal release fr simulated fixed orthodontic appliance-
dc.typeArticle-
dc.contributor.collegeCollege of Dentistry (치과대학)-
dc.contributor.departmentDept. of Orthodontics (교정과학)-
dc.contributor.googleauthorChung-Ju Hwang-
dc.contributor.googleauthorJi-Soo Shin-
dc.contributor.googleauthorJung-Yul Cha-
dc.identifier.doi10.1067/mod.2001.117911-
dc.admin.authorfalse-
dc.admin.mappingfalse-
dc.contributor.localIdA04492-
dc.relation.journalcodeJ00098-
dc.identifier.urlhttp://www.sciencedirect.com/science/article/pii/S0889540601226511?np=y-
dc.contributor.alternativeNameHwang, Chung Ju-
dc.contributor.affiliatedAuthorHwang, Chung Ju-
dc.rights.accessRightsnot free-
dc.citation.volume130-
dc.citation.number4-
dc.citation.startPage383-
dc.citation.endPage391-
dc.identifier.bibliographicCitationAmerican Journal of Orthodontics and Dentofacial Orthopedics, Vol.130(4) : 383-391, 2001-
dc.description.scptc83-
dc.date.scptcdate2019-01-05-
Appears in Collections:
1. Journal Papers (연구논문) > 2. College of Dentistry (치과대학) > Dept. of Orthodontics (교정과학교실)

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.