Cited 0 times in
Wear of resin composites polymerized by conventional halogen light curing and light emitting diodes curing units
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박성호 | - |
dc.contributor.author | 정일영 | - |
dc.date.accessioned | 2015-08-26T16:38:48Z | - |
dc.date.available | 2015-08-26T16:38:48Z | - |
dc.date.issued | 2005 | - |
dc.identifier.issn | 1013-9826 | - |
dc.identifier.uri | https://ir.ymlib.yonsei.ac.kr/handle/22282913/114845 | - |
dc.description.abstract | In this study, the wear characteristics of five different dental composite resins cured by conventional halogen light and LED light sources were investigated. Five different dental composite resins of Surefil, Z100, Dyract AP, Fuji II LC and Compoglass were worn against a zirconia ceramic ball using a pin-on-disk type wear tester with 15 N contact force in a reciprocal sliding motion of sliding distance of 10 mm/cycle at 1Hz under the room temperature dry condition. The wear variations of dental composite resins were linearly increased as the number of cycles increased. It was observed that the wear resistances of these specimens were in the order of Dyract AP > Surefil > Compoglass > Z100 > Fuji ı LC. On the morphological observations by SEM, the large crack formation on the sliding track of Fuji ıLC specimen was the greatest among all resin composites. Dyract AP showed less wear with few surface damage. There is no significant difference in wear performance between conventional halogen light curing and light emitting diodes curing sources. It indicates that a light emitting diodes (LED) source can replace a halogen light source as curing unit for composite resin restorations. | - |
dc.description.statementOfResponsibility | open | - |
dc.format.extent | 645~648 | - |
dc.relation.isPartOf | Key Engineering Materials | - |
dc.rights | CC BY-NC-ND 2.0 KR | - |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/2.0/kr/ | - |
dc.subject.MESH | Dental Composite Reins | - |
dc.subject.MESH | Halogen Light Curing | - |
dc.subject.MESH | Light Emitting Diodes Curing | - |
dc.subject.MESH | Wear | - |
dc.title | Wear of resin composites polymerized by conventional halogen light curing and light emitting diodes curing units | - |
dc.type | Article | - |
dc.contributor.college | College of Dentistry (치과대학) | - |
dc.contributor.department | Dept. of Conservative Dentistry (보존과학) | - |
dc.contributor.googleauthor | Hwan Kim | - |
dc.contributor.googleauthor | Sung Ho Park | - |
dc.contributor.googleauthor | Kwon Yong Lee | - |
dc.contributor.googleauthor | S.B. Jeon | - |
dc.contributor.googleauthor | I.Y. Jung | - |
dc.identifier.doi | 10.4028/www.scientific.net/KEM.288-289.645 | - |
dc.admin.author | false | - |
dc.admin.mapping | false | - |
dc.contributor.localId | A01514 | - |
dc.contributor.localId | A03700 | - |
dc.relation.journalcode | J01939 | - |
dc.identifier.pmid | 10.4028/www.scientific.net/KEM.288-289.645 | - |
dc.identifier.url | http://www.scientific.net/KEM.288-289.645 | - |
dc.subject.keyword | Dental Composite Reins | - |
dc.subject.keyword | Halogen Light Curing | - |
dc.subject.keyword | Light Emitting Diodes Curing | - |
dc.subject.keyword | Wear | - |
dc.contributor.alternativeName | Park, Sung Ho | - |
dc.contributor.alternativeName | Jung, Il Young | - |
dc.contributor.affiliatedAuthor | Park, Sung Ho | - |
dc.contributor.affiliatedAuthor | Jung, Il Young | - |
dc.rights.accessRights | not free | - |
dc.citation.volume | 288~289 | - |
dc.citation.startPage | 645 | - |
dc.citation.endPage | 648 | - |
dc.identifier.bibliographicCitation | Key Engineering Materials, Vol.288~289 : 645-648, 2005 | - |
dc.identifier.rimsid | 38514 | - |
dc.type.rims | ART | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.