552 676

Cited 0 times in

밀링 방법으로 제작한 레진과 지르코니아 3본 브릿지 모델의 3차원 분석을 이용한 재현성 비교

DC Field Value Language
dc.contributor.author박지만-
dc.date.accessioned2019-01-15T16:47:51Z-
dc.date.available2019-01-15T16:47:51Z-
dc.date.issued2018-
dc.identifier.issn1229-5418-
dc.identifier.urihttps://ir.ymlib.yonsei.ac.kr/handle/22282913/166645-
dc.description.abstractPurpose: The objective of this study was to investigate the reproducibility of milled acrylic resin and zirconia models using three-dimensional analysis. Material and Methods: Zirconia discs and acrylic resin blocks were milled to make models. Each model was scanned with a model scanner. The zirconia models were superimposed with other zirconia model, and the acrylic resin models were superimposed with other acrylic resin model threedimensionally. Root-mean-square (RMS) values were obtained. Distances between two superimposed models were measured. Statistical significances were tested using the Mann-Whitney U test and t-test. Results: The RMS values of the zirconia model and the acrylic resin model were not significantly different ( p ≥0.05). At the premolar site, distances between the zirconia models at the upper axial and at the lower axial wall were significantly smaller than for the acrylic resin models ( p <0.05). At the molar site, distance between the zirconia models at the lower axial wall was significantly smaller than for the acrylic resin models ( p <0.05). Conclusion: Although there is a difference in reproducibility between the milled acrylic resin model and the zirconia model in the localized region, no significant difference was found in the whole model.-
dc.description.statementOfResponsibilityopen-
dc.formatapplication/pdf-
dc.languageImplantology-
dc.publisherImplantology-
dc.relation.isPartOfImplantology-
dc.rightsCC BY-NC-ND 2.0 KR-
dc.rightshttps://creativecommons.org/licenses/by-nc-nd/2.0/kr/-
dc.title밀링 방법으로 제작한 레진과 지르코니아 3본 브릿지 모델의 3차원 분석을 이용한 재현성 비교-
dc.title.alternativeComparison of Reproducibility of Milled Acrylic Resin and Zirconia Models for 3-unit bridge Using Three-dimensional Analysis-
dc.typeArticle-
dc.contributor.collegeCollege of Dentistry (치과대학)-
dc.contributor.departmentDept. of Prosthodontics (보철과학교실)-
dc.contributor.googleauthor박강석-
dc.contributor.googleauthor김성균-
dc.contributor.googleauthor허성주-
dc.contributor.googleauthor곽재영-
dc.contributor.googleauthor박지만-
dc.contributor.googleauthor안진수-
dc.contributor.googleauthor서덕규-
dc.identifier.doi10.32542/implantology.20180011-
dc.contributor.localIdA05595-
dc.relation.journalcodeJ03149-
dc.subject.keywordZirconia-
dc.subject.keywordMilled acrylic resin-
dc.subject.keywordThree-dimensional analysis-
dc.subject.keywordReproducibilit-
dc.contributor.alternativeNamePark, Ji-Man-
dc.contributor.affiliatedAuthor박지만-
dc.citation.volume22-
dc.citation.number3-
dc.citation.startPage130-
dc.citation.endPage138-
dc.identifier.bibliographicCitationImplantology, Vol.22(3) : 130-138, 2018-
dc.identifier.rimsid57917-
dc.type.rimsART-
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Prosthodontics (보철과학교실) > 1. Journal Papers

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.