287 316

Cited 0 times in

임플란트의 직경, 길이 및 디자인변화가 임플란트 안정성지수(ISQ)에 미치는 영향

Other Titles
 The influence of implant diameter, length and design changes on implant stability quotient (ISQ) value in artificial bone 
Authors
 이정열  ;  이원창  ;  김민수  ;  김종은  ;  신상완 
Citation
 Journal of Korean Academy of Prosthodontics (대한치과보철학회지), Vol.50(4) : 292-298, 2012 
Journal Title
 Journal of Korean Academy of Prosthodontics (대한치과보철학회지) 
ISSN
 0301-2875 
Issue Date
2012
Keywords
Insertion torque ; Implant Stability Quotient (ISQ) value ; length and type of implant ; RFA (resonance frequency analysis)
Abstract
Purpose : The purpose of this study is to ascertain the stability of the implant by comparing the effects of the change of implant diameter, length and design on implant stability quotient. Materials and methods : To remove the variable due to the difference of bone quality, the uniform density (0.48 g/cm3) Polyuretane foam blocks (Sawbones®, Pacific Research Laboratories Inc, Vashon, Washington) were used. Implants (Implantium®, Dentium, Seoul, Korea) were placed with varying diameters (ϕ3.8, ϕ4.3 and ϕ4.8) and length (8 mm, 10 mm and 12 mm), to assess the effect on implant stability index (ISQ). Also the influence of the design of the submerged and the non-submerged (SimplelineII®, Dentium, Seoul, Korea) on ISQ was evaluated. To exclude the influence of insertion torque, a total of 60 implants (n = 10) were placed with same torque to 35 N. Using Osstell™ mentor (Integration Diagnostic AB, Sweden) ISQ values were recorded after measuring the resonant frequency, one-way ANOVA and Tukey HSD test results were analyzed. (α=0.05). Results : 1. The change of the diameter of the implant did not affect the ISQ (P>.05), but the increase of implant length increased the ISQ(P<.001). 2. The change in implant design were correlated with the ISQ, and the ISQ of submerged design was significantly higher than that of the non-submerged design(P<.05). Conclusion : In order to increase implant stability, the longer implant is better to be selected, and on the same length of implant, submerged design is thought to be able to get a higher ISQ than the non-submerged.
Files in This Item:
T201206350.pdf Download
DOI
10.4047/jkap.2012.50.4.292
Appears in Collections:
2. College of Dentistry (치과대학) > Dept. of Prosthodontics (보철과학교실) > 1. Journal Papers
Yonsei Authors
Kim, Jong Eun(김종은) ORCID logo https://orcid.org/0000-0002-7834-2524
URI
https://ir.ymlib.yonsei.ac.kr/handle/22282913/158327
사서에게 알리기
  feedback

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse

Links