On the use of a spin-echo based double inversion recovery acquisition for the measurement of cortical brain thickness.
Yoonho Nam ; Eung Yeop Kim ; Dong-Hyun Kim
Journal of Magnetic Resonance Imaging, Vol.33(5) : 1218~1223, 2011
Journal of Magnetic Resonance Imaging
PURPOSE: To determine whether a spin-echo-based sequence, which are inherently insensitive to magnetic field inhomogeneity, can be used for brain cortical thickness measurement studies.
MATERIALS AND METHODS: By using a double inversion recovery (DIR) spin-echo-based sequence, cortical thickness estimates were performed from data acquired from seven healthy volunteers. The cortical thickness was also calculated from data acquired using an MPRAGE sequence and the Bland-Altman analysis was performed for comparison of the two methods. The average signal and contrast to noise ratios (SNR, CNR) of the two methods were also calculated.
RESULTS: The bias over the entire brain between DIR and MPRAGE was 0.87 ± 0.08 mm. The bias calculated in the major regional lobes were temporal: 0.76 ± 0.09 mm, frontal: 0.89 ± 0.07 mm, parietal: 0.92 ± 0.10 mm, occipital: 0.75 ± 0.12 mm, and cingulate: 0.79 ± 0.10 mm. This thickness difference was due mainly to the boundary difference in the MPRAGE and DIR at the grey matter/cerebral spinal fluid (GM/CSF) regions. The mean SNR and CNR was CNR(MPRAGE) = 47.8 ± 8.4 and CNR(DIR) = 19.2 ± 2.9, SNR(MPRAGE) = 76.8 ± 10.5 and SNR(DIR) = 21.1 ± 2.8.
CONCLUSION: The study suggests that cortical thickness measurements can be performed using a DIR spin-echo sequence, which is inherently immune to main field inhomogeneity. Larger thickness measurements were consistently observed in DIR compared with MPRAGE.